FAQs | Find Answers

Search Results

Results 51 - 60 of 105

Recommended Links
  1. How to Format a connected USB hard drive(TS5000,TS-2RZ series)
    [Answer ID: 15399]
    Note:Under some circumstances, data deleted when a drive is formatted can be recovered. To ensure that data is “gone forever”, a format might not be sufficient. See “Erase Data on the TeraStation Completely”....
  2. Movie: How to hot swap a TeraStation hard drive if a drive error occurs.
    [Answer ID: 15446]
  3. What does the message on the LCD display indicate when the ERROR LED is turned on? (TS3000 series)
    [Answer ID: 15469]
    Refer to the following boxes which is listed the meaning of LED blinking and the resolution.LCD MessageDescriptionCorrective ActionBOOT FAILHard drive not found.Contact Buffalo technical support for assistance....
  4. What does the message on the LCD display indicate when the INFO LED is turned on? (TS3000 series)
    [Answer ID: 15471]
    After you change settings or format a hard drive, the current status is displayed on the LCD.LCD MessageDescriptionCorrective ActionHDx Warning I11 Bad SectorsThe bad sectors in hard drive X may have reached a dangerous level....
  5. What does the message on the LCD display indicate when the ERROR LED is turned on? _02 (TS3000 series)
    [Answer ID: 15472]
    Refer to the following boxes which is listed the meaning of LED blinking and the resolution.If the firmware version is 1.12 or earlier, please click here to see the error codes.LCD Message...
  6. What does the message on the LCD display indicate when the INFO LED is turned on? _02 (TS3000 series)
    [Answer ID: 15473]
    After you change settings or format a hard drive, the current status is displayed on the LCD.If the firmware version is 1.12 or earlier, please click here to see the current status....
  7. Which of LAN1 and LAN2 is used for the replication task?
    [Answer ID: 15490]
    - If the firmware version of the TeraStation is 2.50 or earlier, LAN port below is used for replication, depending on the way of connection. The main TeraStation and the backup TeraStation are connected with LAN1 only.: LAN1 is used for replication....
  8. Flickr cannot be configured from the LinkStation.
    [Answer ID: 15548]
    Flickr has modified their services and thus is no longer available from the LinkStation.
  9. Settings were reset after updating the firmware. (TS-2RZ Series)
    [Answer ID: 15633]
    Some settings will be reset after updating the firmware ver.1.xx to ver.2.00 or later. In this case, please set them again. Case 1. DLNA settings of a folder will be disabled.Solution 1....
  10. I cannot connect to the PPTP server in Windows 10.
    [Answer ID: 15756]
    Refer to the following steps to change the VPN connection setteings, if a PPTP server is used. Right-click the Network icon in the taskbar notification area and choose [Open Network and Sharing Center]....
< Previous  2  3  4  5  6  7  8  9  10  Next >

Refine your search

Select Product / OS & Hardware

      Enter Keywords or a specified ID