[Answer ID: 14626]

How to: Back up data to Network Attached Storage (ANS) over the Internet (Professional Firmware ) ?

Created 08/22/2012 17:40  |   Updated 09/07/2012 17:36

 

Buffalo Router (User Friendly Firmware) supports NAS function. User Friendly has a built in WebAccess feature which allows access from Internet to NAS device through WEB Interface.

 

To learn more about WEB Access Setup using UserFriendly F/W see the following link: (1) (2) (3). 

 

With Professional Firmware (DD-WRT for Buffalo), Internet access to NAS can be accomplished through VPN setup.

 

First Setup NAS :

 

1-      Connect Storage device to router USB port.

2-      Connect PC to Router and launch browser to management WEB UI.

3-      Log-in and navigate to Service | USB tab and enable : Core USB Support, USB Storage, and Automatic Drive Mount. Next click Apply Settings.

4-      Navigate to Service | NAS tab and under File Sharing Enable Samba.

5-      Under Shares select mount path and set shared folder name and access .

6-      Under Users, Click “Add User”. Enter user name and password.

7-      Click “Apply Settings” .  In Windows you can verify shared by entering

\\IP-Address in file explorer.

 

Second Setup VPN Server (PPTP) on router:

 

See This Link for more details >>>

 

1-Go to setup and record the following for the next step:

A) LAN IP address (example: 192.168.11.1)

B) DHCP address pool ( Example : 192.168.11.100 ~ 192.168.11.149)

 

2- Go to "Service" | "VPN" tab

 

3- Click enable PPTP server Enable option.

Set enable broadcast option if you are using it for small home/office and/or for special gaming applications.

 

4- Set DNS1 , DNS2 and WINS IP address.

 

5- Set Server IP address. This should be a valid IP address in LAN address rang (i.e. 192.168.11.X) . where X is out side of the DHCP address pool.

The IP address should be outside of the DHCP address pool. ( in this example DHCP address range is 192.168.11.100 ~ 192.168.11.149)

Server IP is set to 192.168.11.50.

 

6- Allocate an address or a list of addresses for client IP . This should be a valid IP address in LAN address rang and out side of DHCP address range.

(Example 192.168.11.X -- in this example ; 192.168.11.60 or if there are more you may specify a range as 192.168.11.60-80)

 

7- assign user name password (CHAP secret) in following format :

Username * Password *

    8- Click "Apply Settings"

    9- reboot the router. Turn off and back on. alternatively,

 

 

Finally, Setup VPN client (PPTP) :

 

See This Link for more details >>>

 

To access NAS over Internet, setup VPN connection on PC.

1-Go start menu click "Control Panel" | "Network Sharing Center" and select Setup a new connection or network

2- Select "Connect to workplace"

3- select "Use my Internet connection (VPN)

4- Next, enter DDNS registered domain name and assign the connection a name.

5- Next, Enter User name and password (from VPN setup step 4) .

once connected, you can access shared folder

 In Windows you can verify shared by entering

\\IP-Address (in this example \\ 192.168.11.1 )

 



Details


Products

OS / Hardware

Was this answer helpful?
Please tell us how we can make this answer more useful.

Refine your search

Select Product / OS & Hardware

      Enter Keywords or a specified ID