[Answer ID: 14575]
The message "ACP_STATE_FAILURE" is displayed and the firmware update fails.
Created 07/30/2012 12:46 | Updated 10/04/2013 11:52
Try the following to see if there is any improvement.
- Connect the TeraStation and a PC directly with an Ethernet cable and update the firmware again.
- Initialize the network settings and update the firmware again.
How to Restore the TeraStation to its Factory Defaults
- Disable the security software temporarily and update the firmware again.
If the error is displayed again, contact Buffalo technical support for assistance.
OS / Hardware
Was this answer helpful?
Please tell us how we can make this answer more useful.